arts-numeriques.info portal laboratoire de veille arts numériques – mediaart watchLab

coming soon





be patient i'm working on it.

arts-numeriques.info blog hard/software

puredata

max msp

vvvv

  • Prototype Fund - Funds for Public Interest Tech

    Prototype Fund - Funds for Public Interest Tech

    Who, When and Where Date and Time:  Wednesday Feb 24th 2021 - 18:45 Location:  Berlin…
    - 5 days ago, 24 Feb 21, 8:35pm -
  • vvvv_50beta41

    vvvv_50beta41

    Who, When and Where Date and Time:  Monday Feb 22nd 2021 - 11:23 Dear patchers,this is vvvv beta 41, with mostly 3 changes over the previous release:Now inclu…
    - 7 days ago, 22 Feb 21, 10:39am -
  • 8. worldwide meetup
    Who, When and Where Who:  evvvveryone Date and Time:  Tuesday Feb 23rd 2021 - 20:00 - 22:00 Loca…
    - 11 days ago, 18 Feb 21, 11:25am -
  • vvvv gamma 2021.3 release

    vvvv gamma 2021.3 release

    Who, When and Where Date and Time:  Wednesday Dec 9th 2020 - 15:21 Location:  Berlin…
    - 13 days ago, 16 Feb 21, 12:41pm -
  • VRHAM! Open Call 2021

    VRHAM! Open Call 2021

    Who, When and Where Date and Time:  Thursday Feb 4th 2021 - 12:12 VRHAM! invites immersive artists worldwide to submit their artistic virtual, augmented and mix…
    - 25 days ago, 4 Feb 21, 11:22am -
  • vvvvhat happened in January 2021
    Who, When and Where Date and Time:  Tuesday Feb 2nd 2021 - 18:10 Location:  Berlin…
    - 26 days ago, 3 Feb 21, 10:47am -
  • vvvv gamma 2021.3 release candidate

    vvvv gamma 2021.3 release candidate

    Who, When and Where Date and Time:  Friday Jan 22nd 2021 - 15:24 Location:  Berlin…
    - 28 days ago, 1 Feb 21, 10:58pm -

processing js

max msp blog

arduino

  • newHomebrew Hakko 907 digital soldering station

    Homebrew Hakko 907 digital soldering station

    If you want to upgrade your soldering setup without spending a lot of money, then be sure to check out Angelo AKA TechBuilder’s DIY Hakko 907 station.  This low-cost device features an Arduino Nano to read the iron temperature via an LM358 op-amp,…
    - 15 hours ago, 28 Feb 21, 11:25pm -
  • Monitor your hoverboard’s power draw with this Arduino-based meter/logger

    Monitor your hoverboard’s power draw with this Arduino-based meter/logger

    If you look at your car’s dashboard, there’s a good chance you’ll find an efficiency rating for how you’re driving. However, what if you instead ride a hoverboard? This functionality is certainly not stock equipment, yet Niklas Roy wanted to…
    - 3 days ago, 27 Feb 21, 12:04am -
  • Putting a modern spin on the phenakistoscope

    Putting a modern spin on the phenakistoscope

    The phenakistoscope was invented in the 1800s as a way to view a series of moving pictures on a spinning disc. While the traditional implementation is ingenious in its own right, Nick Lim has created his own take on this venerable concept, using st…
    - 3 days ago, 26 Feb 21, 3:06am -
  • Arduino MKR IoT Carrier: Control what you want, how you want to!

    Arduino MKR IoT Carrier: Control what you want, how you want to!

    By popular demand, we are pleased to announce that it’s now possible to buy the Arduino MKR IoT Carrier. Originally forming a key part of the Arduino Oplá IoT Kit, we’ve responded to our community to make the carrier available on its own, thus e…
    - 5 days ago, 24 Feb 21, 3:00pm -
  • Bikelangelo is a water-dispensing graffiti bicycle trailer

    Bikelangelo is a water-dispensing graffiti bicycle trailer

    Inspired by persistence of vision (POV) projects, Sagarrabanana built a system that incrementally dispenses water as pixels on a flat surface, creating ephemeral dot matrix messages/images. This so-called “Bikelangelo” device is towed by a bic…
    - 7 days ago, 22 Feb 21, 8:04pm -
  • This robotic cue can turn anyone into a pool shark

    This robotic cue can turn anyone into a pool shark

    If you want to get better at billiards, the conventional wisdom is to practice. However, if you’re YouTuber Shane Wighton, you build a robotic cue to play the game for you. His device looks like a cross between a pool stick, a sci-fi robot, and a…
    - 8 days ago, 22 Feb 21, 12:15am -
  • Expand the power of your MKR boards with ROBOTIS DYNAMIXEL Shield

    Expand the power of your MKR boards with ROBOTIS DYNAMIXEL Shield

    We are happy to announce the new ROBOTIS DYNAMIXEL SHIELD for the Arduino MKR series. As part of the “Works with Arduino™” program, the DYNAMIXEL SHIELD expands the capabilities of the MKR family, opening up the opportunity to drive the DYNAMIX…
    - 10 days ago, 19 Feb 21, 11:51am -

live

  • https://youtube.com/devicesupport

    https://youtube.com/devicesupport

    https://youtube.com/devicesupporthttps://youtube.com/devicesupporthttp://m.youtube.comFrom:YouTube HelpViews:32769507 0ratingsTime:03:56More inHowto & Style
    - , 31 May 15, 4:03pm -



blogs - mags - communautés - ressources... les classiques

codelab - général

codelab - forum

codelab - hardware

hackable-devices.org

Opening of faclab
Opening of faclab
- -
Open World Forum 2011 : Recap on the First Experiment Day
Open World Forum 2011 : Recap on the First Experiment Day
- -
Hackable Devices is part of the Creators Project: come tomorrow at La Cantine for the ARTMAKERS #1 !
Hackable Devices is part of the Creators Project: come tomorrow at La Cantine for the ARTMAKERS #1 !
- -
Collateral damage of 3D printing
Collateral damage of 3D printing
- -
Holiday exercices
Holiday exercices
- -
Libre Software Meeting 2001
Libre Software Meeting 2001
- -
One week of demos, workshops and analysis at FabLab Squared at Futur-En-Seine 2011
One week of demos, workshops and analysis at FabLab Squared at Futur-En-Seine 2011
- -

sourceforge.net

  • Projects of the Week, December 21, 2020

    Projects of the Week, December 21, 2020

    Here are the featured projects for the week, which appear on the front page of SourceForge.net: plantumlPlantUml allows you to quickly create some UML diagrams using a simple ...The post Projects of the Week, December 21, 2020 appeared first on Sour…
    - 70 days ago, 21 Dec 20, 5:01am -
  • Today in Tech – 2003
    On this day in 2003 the Controlling the Assault of Non-Solicited Pornography And Marketing, better known as the CAN-SPAM Act of 2003 was signed into law in the ...The post Today in Tech – 2003 appeared first on SourceForge Community Blog.
    - 75 days ago, 16 Dec 20, 5:46am -
  • Projects of the Week, December 14, 2020

    Projects of the Week, December 14, 2020

    Here are the featured projects for the week, which appear on the front page of SourceForge.net: PitchBlack Recovery ProjectPitch Black Recovery is a fork of TWRP with many ...The post Projects of the Week, December 14, 2020 appeared first on SourceF…
    - 77 days ago, 14 Dec 20, 5:18am -
  • Projects of the Week, December 7, 2020

    Projects of the Week, December 7, 2020

    Here are the featured projects for the week, which appear on the front page of SourceForge.net: gnuplotA famous scientific plotting package, features include 2D and 3D plotting, a ...The post Projects of the Week, December 7, 2020 appeared first on…
    - 84 days ago, 7 Dec 20, 5:13am -
  • December 2020, “Staff Pick” Project of the Month – Freeplane

    December 2020, “Staff Pick” Project of the Month – Freeplane

    For our December “Staff Pick” Project of the Month, we selected Freeplane, an application for Mind Mapping, plus Knowledge and Project Management. Freeplane helps to organize and communicate ...The post December 2020, “Staff Pick” Project of…
    - 87 days ago, 4 Dec 20, 5:20am -
  • Today in Tech – 1991
    On this day in 1991 Apple released the very first version of QuickTime, an extensible multimedia framework for playing various formats of digital video. It was a move ...The post Today in Tech – 1991 appeared first on SourceForge Community Blog.
    - 89 days ago, 2 Dec 20, 5:36am -
  • December 2020, “Community Choice” Project of the Month – Dolibarr ERP – CRM

    December 2020, “Community Choice” Project of the Month – Dolibarr ERP – CRM

    For our December “Community Choice” Project of the Month, the community elected Dolibarr ERP – CRM, an open source ERP and CRM web software for business. Dolibarr is ...The post December 2020, “Community Choice” Project of the Month – Do…
    - 90 days ago, 1 Dec 20, 5:02am -

flossmanuals

  • Nouveau livre : Blender pour le montage vidéo

    Nouveau livre : Blender pour le montage vidéo

    Cet été Fmfr a organisé un libérathon. Une dizaine de personnes s'est réunie pour rédiger un livre expliquant l'utilisation de Blender pour le montage vidéo !Co-auteurs Blender pour le Montage vidéo  Un libérathon efficaceDu 6 au…
    - , 6 Sep 18, 7:20am -
  • Liberathon Blender pour l'édition vidéo

    Liberathon Blender pour l'édition vidéo

    Cet été, nous avons un projet bien rigolo : et si nous nous écrivions un livre sur l'édition vidéo avec Blender ? Chiche ! Présentation du projetCela fait longtemps que nous en parlions. De nombreuses personnes sont venues vers nous lors…
    - , 19 Jun 18, 2:12pm -
  • Hackathon CampOSV 2018

    Hackathon CampOSV 2018

     FMfr a participé à la documentation du hackathon CampOSV qui s'est tenu sur Rennes du 13 au 15 mars 2018. L'objectif est de concevoir un véhicule électrique libre ! Présentation du hackathonLe projet CampOSV est portée par une femme…
    - , 22 Mar 18, 9:27am -
  • Nouvelle publication : Initiation à Scribus

    Nouvelle publication : Initiation à Scribus

    Nouveauté : Cédric Gémy a proposé un nouveau livre sur Scribus intitulé Initiation à Scribus. Il se veut pratique et vise l'utilisation de Scribus 1.5.x, le logiciel de mise en page libre qui s'adresse aux professionnels et à ceux qui imprimer…
    - , 6 Dec 17, 9:03am -
  • Livre Blender pour l'impression 3D v2

    Livre Blender pour l'impression 3D v2

    Cédric Gémy a effectué une mise à jour du livre Blender pour l'impression 3D. Mise à jour du livre Blender pour l'impression 3DGrâce au soutien de l'Organisation Internationale de la Francophonie, Cédric Gémy a pu réaliser une relectu…
    - , 5 Dec 17, 9:00am -
  • Livre Processing V3

    Livre Processing V3

    Le livre Processing a été mis à jour par Julien Gachadoat ! Mise à jourGrâce au soutien de l'Organisation Internationale de la Francophonie, le livre Processing a été mis à jour. Il s'agit de la seconde mise à jour depuis le premier b…
    - , 4 Dec 17, 2:25pm -
  • Hackathon Openwaste

    Hackathon Openwaste

    Du 24 au 26 novembre 2017, Floss Manuals francophone a participé au Hackathon Openwaste en tant que docsprinter. Ce hackathon sur la thématique du déchet de caoutchouc a été inspirant ! 7 projets ont été documenté. 7 projets bien différents,…
    - , 28 Nov 17, 9:15pm -

maxobjects database

puredyne

  • newUser:Davjam2/Numbers
    checkArith and use of unsafePerformIO← Older revisionRevision as of 13:47, 1 March 2021 Line 468: Line 468:   }}   }}     − Our first attempt at <code>putOpTable</code>…
    - 10 mins ago, 1 Mar 21, 1:47pm -
  • newTalk:Engineering Acoustics/Reflection and transmission of planar waves
    Created page with "I believe the derivative of u = u_0 * exp(j*(ω*t-k*x)) is: j*ω *u"New pageI believe the derivative of u = u_0 * exp(j*(ω*t-k*x)) is:j*ω *u
    - 27 mins ago, 1 Mar 21, 1:30pm -
  • newHistory of video games/How to Contribute
    ← Older revisionRevision as of 13:18, 1 March 2021 Line 1: Line 1:   + __NOTOC__   +   This section contains information related to the specific Wikibook ''History of video game…
    - 39 mins ago, 1 Mar 21, 1:18pm -
  • newUser:Mbrickn/Book ideas
    ← Older revisionRevision as of 13:16, 1 March 2021 Line 2: Line 2:   This is my current list of book ideas and potential structures. I leave them here to incubate structures and to mull over how t…
    - 41 mins ago, 1 Mar 21, 1:16pm -
  • newDirecting Technology/Maintain/Supporting Technology
    Physical & Electronic Security← Older revisionRevision as of 13:13, 1 March 2021 Line 272: Line 272:   *They follow good security procedures will keep virus infections to a minimum.   *They f…
    - 44 mins ago, 1 Mar 21, 1:13pm -
  • newTalk:Electronics Handbook/Components/Transistors
    QuiteUnusual deleted page Talk:Electronics Handbook/Components/Transistors discussion page of deleted content
    - 45 mins ago, 1 Mar 21, 1:12pm -
  • newElectronics Handbook/Components/Transistors
    QuiteUnusual deleted page Electronics Handbook/Components/Transistors merged
    - 45 mins ago, 1 Mar 21, 1:12pm -

abstractmachineabstractmachine

The Book of ENIAROF
The Book of ENIAROF
- , 11 May 17, 2:15pm -
Salone Ludico
Salone Ludico
- , 4 Apr 17, 11:00am -
METAMORPHOSEON
METAMORPHOSEON
- , 3 Mar 17, 11:22am -
ENIAROF CAFA
ENIAROF CAFA
- , 30 Dec 14, 6:19pm -
Œuf
Œuf
- , 23 Dec 14, 10:18pm -
Snail Run
Snail Run
- , 23 Dec 14, 9:49pm -
The Card Players
The Card Players
- , 6 Mar 14, 6:40pm -

audiofanzine

Software Studies

daniel shiffman blog

  • OpenCV Matching Faces Over Time
    One of the most common questions I get regarding blob tracking is “memory.” How do I know which blob is which over time? Computer vision libraries, for the most part, simply pass you a list of blobs (with x, y, width, and height properties) for a…
    - , 26 Apr 11, 3:29pm -
  • Revisiting Flight404 Particles

    Revisiting Flight404 Particles

    In February 2008, Robert Hodgin published a series of Particle System examples that demonstrated many of the techniques behind his amazing work (i.e.: Magnetosphere). The examples, however, use some advanced GL calls (accessing JOGL directly) and no…
    - , 28 Feb 11, 5:40pm -
  • Asteroids Spaceship
    One of the “trignometry + forces” exercises from my upcoming Nature of Code book is to implement in Processing the spaceship from asteroids. Here’s a solution! // Nature of Code 2011 // Daniel Shiffman // Chapter 3: Asteroids exercise // http:/…
    - , 13 Feb 11, 8:23pm -
  • Nature of Code book: PVector Spring example
    I’m working this week on Chapter 3 of my upcoming Nature of Code book. For the most part, if you are looking to connect particles with springs, I recommend the wonderful verlet physics of toxiclibs, and I have some examples for that here. Neverthel…
    - , 10 Feb 11, 6:34pm -
  • Rotate a Vector (Processing.js!)
    The question of how to rotate a PVector object (the data of the vector itself, I’m not talking about rotating while drawing) came up in my nature of code course yesterday. To do this, you’ll need to convert the vector to polar coordinates (radius…
    - , 3 Feb 11, 5:18pm -
  • The Economics of Self-Publishing via Kickstarter (so far)
    Ever since I launched the Nature of Code kickstarter page I’ve been getting a ton of questions about the economics of this book project. Though I hate to take any precious moments away from the actual writing of the book, I thought I’d take some…
    - , 28 Jan 11, 7:23pm -
  • How to Build OpenCV Static Libraries Mac OS X (10.5 compatible!)

    How to Build OpenCV Static Libraries Mac OS X (10.5 compatible!)

    ITP student Patrick Hebron and I have been working on a new Processing video library built on top of OpenCV (with the goal of no vdig on windows and better movie playback support all around.) This is all a bit obscure, but it was such a struggle to b…
    - , 23 Jan 11, 9:20pm -

les livres blancs - informatique

  • Solutions de gestion d'énergie
    L’omniprésence des environnements virtualisés a fait émerger trois types de nouveaux besoins. D’une part, optimiser la consommation. En second lieu, assurer la continuité de l’activité. En troisième lieu, superviser et gérer le foncti…
    - , 2 Jul 16, 3:27pm -
  • Les 5 grands défis du DSI
    Les Directeurs des Systèmes d’Information n’ont eu autant de dé s à relevequ’en cette seconde décennie du 21 siècle. Les bouleversements sont tels que c’est la profession toute entière, contrainte de se réformer en profondeur, qui…
    - , 1 Jul 16, 3:57pm -
  • Blockchain and beyond
    Extrait du livre blanc : "Bitcoin, the crypto-currency, known for allowing direct transfer of money between individuals, without relying on a bank, has been gaining popularity and publicity over the years. Still many people haven’t heard of it or t…
    - , 22 Dec 15, 1:32pm -
  • Marché secondaire des logiciels
    Extrait du livre blanc : "Les grandes entreprises sont confrontées depuis plusieurs années à un accroissement des audits de licences par les éditeurs de logiciels. Et si globalement, les audits sont vécus par les entreprises utilisatrices comme…
    - , 10 Dec 14, 7:58am -
  • Données connectées et technologies du graphe. Le challenge des systèmes d’information intelligents

    - , 1 Jul 14, 1:48pm -
  • SaaS ITSM : vision et recommandations d'experts
    Extrait du livre blanc : "Aujourd’hui, tout professionnel des Centres de Services IT sait que les utilisateurs s’attendent à avoir de l’assistance à tout moment et de n’importe où. Ces utilisateurs sont au fait des nouvelles technologies,…
    - , 1 Mar 13, 1:25pm -
  • Gestion de la Capacité et Lean Six Sigma : partez à la chasse aux gaspillages
    Un livre blanc Orsyp Institute : Gestion de la Capacité & Lean Six Sigma : partez à la chasse aux gaspillages "L’efficience est aujourd’hui sur le devant de la scène dans les Opérations IT. La question qui se pose est d’ajuster à temps, et…
    - , 26 Dec 12, 12:49pm -

les livres blancs - internet

  • Marché, solutions et recommandations pour le développement de l’internet des objets en France
    Extrait du livre blanc : "L’Internet des Objets (Internet of Things, IoT) est un marché vaste et segmenté, dont le potentiel de développement est considérable. Dans le cadre du programme « Nouvelle France industrielle », un groupe de travail…
    - , 18 Dec 15, 10:13am -
  • Internet des objets, M2M. Quels acteurs pour ces nouveaux modèles ?
    Extrait du livre blanc : "Dans la vision globale de l'Internet des objets, les objets qui nous entourent sont dotés d'une capacité à communiquer, traiter des informations, prendre des décisions, envoyer des informations et des commandes. Ces fonc…
    - , 25 Nov 15, 8:53am -
  • Smart cities et objets connectés

    - , 24 Sep 15, 7:50am -
  • Internet des objets
    Extrait du livre blanc : "Grâce aux témoignages que nous avons recueillis, nous allons commencer par passer en revue les grands domaines d’application de l’Internet des Objets, que ce soit dans la vie de tous les jours ou en environnement profe…
    - , 25 Jun 15, 12:07pm -
  • La révolution du commerce par les objets connectés
    Extrait du livre blanc : "Les objets connectés sont les sujets à la mode de ces derniers mois, tout comme le Big Data déjà l’année dernière…Ils envahissent le quotidien des sportifs professionnels, mais aussi des amateurs qui ont soif de me…
    - , 27 Oct 14, 9:30am -
  • Outils et acteurs incontournables du Web
    Extrait du livre blanc : "L’internet est un secteur d’activité à part. Chaque année, il fournit le plus grand contingent de nouveaux milliardaires recensés par le magazine Forbes. Les heureux élus ont un point commun : ce sont des passionné…
    - , 23 Oct 14, 6:28am -
  • Le contrôle parental intelligent : ouvrir les "digital natives" à leur propre monde !
    Extrait du livre blanc : "Internet est désormais pour les enfants, non seulement une source de connaissance, mais également une source de développement personnel. Il est donc nécessaire de leur fournir un accès adéquat. Cet accès doit non seul…
    - , 28 Aug 14, 7:17am -



fablab - hack & bidouillage hard/software

fablab_info

makery

FabLab Hub

dorkbot - websearch

dorkbot paris

imal - les rendez-vous

  • iMAL at work

    iMAL at work

    Date: 21 November - 24 November 2019Discover the new home we’re building for our digital futureAfter two years of hard work, we are inviting everyone to join us for an extended preview of what’s to come at iMAL!More info...Category: Performances…
    - , 15 Oct 19, 9:16am -
  • CreativeFab 2019

    CreativeFab 2019

    Date: 5 November 2018 - 26 April 2019Éducation à la Fabrication Numérique pour BruxellesiMAL organise plusieurs workshops d'introduction à la fabrication numérique pour différentes hautes écoles artistiques bruxelloises francophones et néerla…
    - , 5 Jun 19, 12:46pm -
  • Summer Digital Workshops 2019

    Summer Digital Workshops 2019

    Date: 9 July - 9 August 2019Processing, Arduino, Raspberry Pi, CAD & Digital fabricationJoin us for an inspiring summer under the digital sun and discover how to write code, to build objects that connect to sensors, physical outputs or the internet,…
    - , 3 May 19, 1:33pm -
  • Music 101

    Music 101

    Date: 4 May - 5 May 2019Création d'instruments Arduino au fablab.Imal avec Arthur BaudeUn workshop pour apprendre à utiliser un Arduino, un Microbit ou un Bare Conductive pour faire du son! Le formateur, Arthur Baude est un artiste-designer et mak…
    - , 16 Apr 19, 2:38pm -
  • Tunnel Hearing

    Tunnel Hearing

    Date: Thursday, 25 April 2019 | 19:00A performance by Alexandra Dementieva & JJ DuerinckxIn collaboration with, and in the framework of Festival des Nuits du Beau Tas 2019More info...Category: Performances
    - , 3 Apr 19, 1:56pm -

electrolab

  • Nanterre Info parle de nous !

    Nanterre Info parle de nous !

    En guise de bonne année, Nanterre Info revient sur le projet de pousse seringue open source mené à l’Electrolab !Janvier 2021C’est pas nous qu’on a choisi le titre 😛Si vous souhaitez en savoir plus, visitez le site …L’article…
    - 54 days ago, 6 Jan 21, 10:46pm -
  • COVID 19 : restrictions 2ème vague
    C’était prévu depuis le début de la crise sanitaire, nous subissons la deuxième vague de cette épidémie.Aussi les contraintes changent et en voici le détail :Nous prions les membres particuliers de ne pas venir à l’Electrolab,Les memb…
    - , 8 Nov 20, 8:55pm -
  • COVID 19 : horaires et règles
    En raison de l’épidémie du COVID-19, l’Électrolab doit adapter ses horaires d’ouvertures ainsi que les règles s’appliquant auprès des personnes présentes dans le local.Horaires d’ouverture:Lundi, mercredi, vendredi : 14h – 19hMa…
    - , 26 Oct 20, 2:33pm -
  • Statuts
    Date : Jeudi 27 Novembre 2014Il est fondé entre les adhérents aux présents statuts une association régie par la loi du 1 juillet 1901 relative au contrat d’association et le décret du 16 août 1901, ayant pour titre~: Electrolab.…L’a…
    - , 25 Sep 20, 1:27pm -
  • Zone couture
    Pour tous vos travaux de couture, tricot ou autres activités textiles c’est ici qu’il faut se rendre !Hébergée pour le moment sur deux grandes tables en zone électronique la zone couture a depuis longtemps, grâce à son dynamisme, une …L…
    - , 28 Aug 20, 11:51am -
  • Zone Méca Heavy
    La zone Méca heavy met à disposition les outils pour l’usinageC’est l’une des zones emblématique du lab, elle permet aux amateurs d’accéder à des machines d’usinage de classe industrielles.La zone méca lourde (méca heavy) dispose d…
    - , 20 Apr 20, 9:40pm -
  • Formation impression 3D filament
    Apprendre à utiliser les imprimantes 3D filamentLien sur forum : Formations Impression 3D…L’article Formation impression 3D filament est apparu en premier sur Electrolab.
    - , 12 Apr 20, 10:28pm -

la grotte du barbu

instructables technology

Making a Model CubeSat
Making a Model CubeSat
- , 10 May 19, 12:45am -
RGB Light Box
RGB Light Box
- , 8 May 19, 6:21pm -
Building an Automatic Solar Tracker with Arduino UNO
Building an Automatic Solar Tracker with Arduino UNO
- , 7 May 19, 9:15pm -
Ultra Realistic Surfing Simulator
Ultra Realistic Surfing Simulator
- , 7 May 19, 8:18pm -
Laser Cut Card Decks
Laser Cut Card Decks
- , 7 May 19, 6:45pm -
Slapstick
Slapstick
- , 7 May 19, 6:40pm -
Phone Controlled Kite Line Parabear Dropper
Phone Controlled Kite Line Parabear Dropper
- , 7 May 19, 6:01pm -

makezine

  • Supporting Maker Education through the Infy Maker Awards

    Supporting Maker Education through the Infy Maker Awards

    As a result of COVID19, this past year has presented a magnitude of challenges to learning and education that has not been seen before. The sudden flip to a remote or hybrid model has made learning more difficult for some and nearly impossible for ot…
    - 3 days ago, 26 Feb 21, 4:00pm -
  • Secret Life of Machines’ Tim Hunkin Is Back With New Web Series

    Secret Life of Machines’ Tim Hunkin Is Back With New Web Series

    The Secret Life of Machines alum Tim Hunkin is set to unveil a new web series focusing on explaining basic components, called The Secret Life of Components.Read more on MAKEThe post Secret Life of Machines’ Tim Hunkin Is Back With New Web Series…
    - 3 days ago, 26 Feb 21, 4:00pm -
  • Skill Builder: What Wood Finishes Are The Most Eco Friendly?

    Skill Builder: What Wood Finishes Are The Most Eco Friendly?

    Study up on quality woodworking finishes that won’t destroy the worldRead more on MAKEThe post Skill Builder: What Wood Finishes Are The Most Eco Friendly? appeared first on Make: DIY Projects and Ideas for Makers.
    - 4 days ago, 25 Feb 21, 4:00pm -
  • What Would You Do With An Industrial AI Platform?

    What Would You Do With An Industrial AI Platform?

    Get ready to start thinking on a whole different level. With the E-RT3, you could be doing automation with some of the toughest and most robust hardware in the world. In this contest, Make: Community along with Yokogawa challenge you to come up with…
    - 5 days ago, 24 Feb 21, 4:00pm -
  • Maker (Faire Producer) Spotlight: Enrique Saavedra Martínez and Marcos Saavedra

    Maker (Faire Producer) Spotlight: Enrique Saavedra Martínez and Marcos Saavedra

    "Don't think too much and make it happen!"Read more on MAKEThe post Maker (Faire Producer) Spotlight: Enrique Saavedra Martínez and Marcos Saavedra appeared first on Make: DIY Projects and Ideas for Makers.
    - 6 days ago, 23 Feb 21, 11:22pm -
  • Shift 5% of Workforce Training Funds to Advance Entrepreneurship

    Shift 5% of Workforce Training Funds to Advance Entrepreneurship

    America’s economic recovery from the COVID-19 pandemic requires new business growth. An estimated 60% of business closures due to the pandemic appear to be permanent, and new businesses create virtually all job growth in America. Here’s one solut…
    - 6 days ago, 23 Feb 21, 10:08pm -
  • The Very Slow Movie Player

    The Very Slow Movie Player

    Ambient cinema is the perfect lockdown projectRead more on MAKEThe post The Very Slow Movie Player appeared first on Make: DIY Projects and Ideas for Makers.
    - 6 days ago, 23 Feb 21, 4:00pm -

arduinoarts

  • Video: Unboxing the new Amazon Dash Button
    Unboxing the New Amazon Dash Button! Related Posts9 amazing projects where Arduino & Art meet!10000Just a few of many, many, many amazing projects that are on the web where Tech meet the Art... this time focused on Arduino (or simple… Continuar ley…
    - , 20 Jan 17, 2:29pm -
  • News: A swarm of drones deployed from an F18 fighters (Video)
    This is amazing… from simple drone swarms playing James Bonds movie themes (link here), now we finally see the objective of this smart independent drone swarms (or at least one of the main objectives): Military purposes. The video is only… Contin…
    - , 12 Jan 17, 3:49pm -
  • Blog: The Internet of Everything
    We are hearing constantly the term Internet of Things, as a new «trend», a new concept, new technology… but besides of things connected to the internet, what does it really means? We believe the internet of things is just another… Continuar ley…
    - , 30 Jun 16, 1:05pm -
  • On Kickstarter: BATBAND, ear free headphones via Bone Conduction!
    What is BatBand? BATBAND™ is an elegant piece of sound technology allowing you to listen to your private soundscape as well as the world that surrounds you. Human-centered design meets technology delivering a high fidelity acoustic experience via a…
    - , 9 Sep 15, 4:28pm -
  • News: Some robot fails from the DARPA Robotics Challenge
    Not too much comments on this….   via: Youtube.com Related PostsOn Kickstarter: Ringo – The palm size robot with real personality!10000Ringo is a super cute pet robot bug based on the Arduino UNO and packed with goodies including an acceleromete…
    - , 11 Jun 15, 9:58pm -
  • On Indiegogo: TZOA Wearable Air Quality Tracker
    What is TZOA? Elegant wearable device that helps you breathe clean air #seetheair What can it do? 1. Real-Time Air Quality Report TZOA takes data from your immediate environment in real-time and turns it into actionable recommendations to keep you……
    - , 10 Jun 15, 6:18pm -
  • News: The first Arduino boards made in USA!
    The first boards made in USA by Adafruit! (source Adafruit and Make) Related PostsNews: Arduino Announces New Brand, Genuino, Manufacturing Partnership with Adafruit10000  Seems like the Arduno vs Arduino battle is continuing!, but this is a better…
    - , 26 May 15, 7:03pm -

planet.madeinfr.org

  • Un pré-ampli phono dans une manette NES

    Un pré-ampli phono dans une manette NES

    Cela fait un petit moment que je n'ai rien posté! Après deux années assez chargées, je commence à retrouver du temps pour être créatif.J'ai réalisé dernièrement un préampli pour une platine disque que j'ai trouvé dans une brocante. Histoi…
    - , 28 Feb 19, 4:53pm -
  • Une éolienne à axe vertical -14-

    Une éolienne à axe vertical -14-

    Suite de l'ouvrage précédent :Peinture :Afin de protéger le métal de la rouille, nous avons passé deux couches de peinture à l'eau, au pistolet pour les grandes surfaces, et aux pinceaux pour le reste.Cette opération a nécessité le d…
    - , 23 Feb 19, 1:02pm -
  • Une éolienne à axe vertical -13-

    Une éolienne à axe vertical -13-

    Suite de l'ouvrage précédent :Comme prévu, j'ai donc décidé d'attaquer la partie production électrique avec la fabrication d'une génératrice à aimant permanent.Malgré l'obsolescence annoncée du projet par Vijay, j'ai procédé à la…
    - , 22 Feb 19, 7:08pm -
  • Un anémomètre WiFi -2-

    Un anémomètre WiFi -2-

    Suite de l'étude précédente :Avoir un affichage sur le web c'est bien…Une petite vidéo :Mais un module d'affichage physique c'est quand même plus pratique !Une petite vidéo :Une seconde démo en vidéo, avec le programme de l…
    - , 5 Jan 19, 4:56pm -
  • Une éolienne à axe vertical -12-

    Une éolienne à axe vertical -12-

    Suite de l'ouvrage précédent :L'éolienne n'avait pu être mise en place la dernière fois, faute de visserie suffisante pour terminer l'assemblage, et de coupleur de câble métallique nécessaire à la sécurisation du mât.Nous avons donc…
    - , 4 Jan 19, 7:18pm -
  • Un anémomètre WiFi -1-

    Un anémomètre WiFi -1-

    Récemment on m'a indiqué l'existence d'une plaquette électronique du genre Arduino, mais qui a la particularité de pouvoir « faire du WiFi ».D'abord dubitatif quant à l'utilité du truc, étant donné que je m'étais très bien passé de la…
    - , 19 Nov 18, 7:18pm -
  • WebRadioRéveilWifi -Fin-

    WebRadioRéveilWifi -Fin-

    Suite de l'étude précédente :Une petite vidéo :
    - , 1 Nov 18, 3:31pm -

antipastohw

  • Maker Faire NY Re-cap

    Maker Faire NY Re-cap

    It’s been a week since Justin, Mike Rith and I drove down to New York for Maker Faire. Mike and Justin had both tried to explain the nature of the beast that is Maker Faire, but it was clearly something that I had to experience for myself. Note to…
    - , 9 Oct 12, 3:28pm -
  • Getting Ready for Maker Faire NY!

    Getting Ready for Maker Faire NY!

    Call me strange, but I’m a big fan of planning and logistics, so I’m pumped that everything is set for our trip to Maker Faire NY next week!We’re only 8 days, 20 hours, 35 minutes and 12, no 8 seconds away from Maker Faire New York 2012. Thi…
    - , 20 Sep 12, 6:56pm -
  • How to connect a cellular modem on your Android and BeagleBoard on boot up

    How to connect a cellular modem on your Android and BeagleBoard on boot up

    Last week, I wrote a tutorial about how to get a 3G/4G cellular modem working on my Android/BeagleBoard setup. The next question (after everything works) is, how can I get this running automatically every time I boot up my Android device?Boot scripts…
    - , 5 Sep 12, 12:27am -
  • How to install a 3G/4G cellular modem on my Android BeagleBoard setup

    How to install a 3G/4G cellular modem on my Android BeagleBoard setup

    A lot of folks have been asking me about this one, so I figured it’s about time to pull together my notes on the tutorial and get started…In this case, I used an Android Ultimate Pro Kit, which runs Android 2.3.4 on the BeagleBoard xM/BeagleTouch…
    - , 30 Aug 12, 9:55pm -
  • Introducing the Dual-Core Android 4 Dev Kit for PandaBoard

    Introducing the Dual-Core Android 4 Dev Kit for PandaBoard

    With dual-core processors and Android 4 (Ice Cream Sandwich, at least) a mainstay of smartphones and tablets, some folks suggested it was about time for the Beagle Embedded Starter Kit and Android Hardware Development Kit to get a big brother…After…
    - , 22 Aug 12, 2:36pm -
  • Twittering shark laser intrusion detection system, in honor of Shark Week

    Twittering shark laser intrusion detection system, in honor of Shark Week

    Thanks again @bbenchoff for the post about the DIY perpetually-powered wireless outpost on @hackaday! A lot of good discussion on natural/perpetual power sources :) I got an email from Dan earlier this week about making a fish tracking aquarium. Bein…
    - , 14 Aug 12, 9:10pm -
  • Recap: "Forever Sensor" at the RI Mini Maker Faire

    Recap: "Forever Sensor" at the RI Mini Maker Faire

    On Saturday, Rith and I loaded up the car, and took the 30 minute ride down to Providence, RI for the 4th Rhode Island Mini Maker Faire!During the faire, I had chance to explain the concept of the mystery box, and the rooster call it kept making.  T…
    - , 13 Aug 12, 3:17pm -

nycresistor

  • NYC Resistor at RC3 – Avatar Fashion Show on Wed, Dec 30

    NYC Resistor at RC3 – Avatar Fashion Show on Wed, Dec 30

    NYC Resistor at RC3 – Avatar Fashion Show is taking place at NYC Resistor on Wed, Dec 30. Tickets are available on Eventbrite. Launching our virtual NYC Resistor Clubhouse and Hackerspace connector in conjunction with this year’s Chaos Computing…
    - 72 days ago, 19 Dec 20, 2:00pm -
  • Launching the virtual NYCResistor clubhouse

    Launching the virtual NYCResistor clubhouse

    We are super excited to be launching our virtual NYCResistor space – NYC Resistor Clubhouse and Hackerspace connector – in conjunction with Chaos Computing Congress 2020 (CCC) this year known as RC3 – Remote Computing Experience. You can join i…
    - 74 days ago, 17 Dec 20, 11:55pm -
  • NYC Resistor at RC3 – Hacker Dance Party on Sun, Dec 27

    NYC Resistor at RC3 –  Hacker Dance Party on Sun, Dec 27

    NYC Resistor at RC3 – Hacker Dance Party is taking place at NYC Resistor on Sun, Dec 27. Tickets are available on Eventbrite. Launching our virtual NYC Resistor Clubhouse and Hackerspace connector in conjunction with this year’s Chaos Computing C…
    - 74 days ago, 17 Dec 20, 9:00pm -
  • NYC Resistor at RC3 – Femme Hackers Meetup on Sun, Dec 27

    NYC Resistor at RC3 – Femme Hackers Meetup on Sun, Dec 27

    NYC Resistor at RC3 – Femme Hackers Meetup is taking place at NYC Resistor on Sun, Dec 27. Tickets are available on Eventbrite. Launching our virtual NYC Resistor Clubhouse and Hackerspace connector in conjunction with this year’s Chaos Computing…
    - 74 days ago, 17 Dec 20, 7:00pm -
  • While our doors are closed, help us keep the lights on

    While our doors are closed, help us keep the lights on

    Like many community spaces, both in New York and across the world, NYC Resistor has suspended all in-person events until it’s safer for people to breathe the same air indoors. More than ever we feel the need to stay connected to our community, you!…
    - , 14 Sep 20, 2:00pm -
  • (Online) Arduino: Sensors and Input/Output on Sat, Aug 22

    (Online) Arduino: Sensors and Input/Output on Sat, Aug 22

    (Online) Arduino: Sensors and Input/Output is taking place at NYC Resistor on Sat, Aug 22. Tickets are available on Eventbrite. In this class held over Zoom video conference, we’ll introduce Arduino and learn how to manipulate outputs based on sens…
    - , 12 Aug 20, 5:00pm -
  • Announcing the Annual NYCR Interactive Show 2020!

    Announcing the Annual NYCR Interactive Show 2020!

    Some say that time is a circle, but we know the real truth, time is a Tube! Announcing the 2020 Virtually Interactive Show: Tubular Time, happening August 15th 2020, in cyberspace. While we won’t be gathering in the space, we will still have real i…
    - , 21 Jul 20, 11:12am -

hackable-devices.org - veille

instructables arduino channel

Making a Model CubeSat
Making a Model CubeSat
- , 10 May 19, 12:45am -
Building an Automatic Solar Tracker with Arduino UNO
Building an Automatic Solar Tracker with Arduino UNO
- , 7 May 19, 9:15pm -
Ultra Realistic Surfing Simulator
Ultra Realistic Surfing Simulator
- , 7 May 19, 8:18pm -
Slapstick
Slapstick
- , 7 May 19, 6:40pm -
Phone Controlled Kite Line Parabear Dropper
Phone Controlled Kite Line Parabear Dropper
- , 7 May 19, 6:01pm -
Arduino LED Dice Lights 2
Arduino LED Dice Lights 2
- , 7 May 19, 3:45pm -
Solar Powered Cellar Lighting
Solar Powered Cellar Lighting
- , 7 May 19, 3:25pm -



bookmarks

marc watthieu - software

marc watthieu - programming

  • Sponsored: 64% off Code Black Drone with HD Camera
    Our #1 Best-Selling Drone--Meet the Dark Night of the Sky!
    - -
  • Processing.js

    - , 30 Nov 10, 6:34pm -
  • MooTools - a compact javascript framework
    MooTools is a compact, modular, Object-Oriented JavaScript framework designed for the intermediate to advanced JavaScript developer.
    - , 13 Oct 10, 9:43pm -
  • Asual | SWFAddress - Deep linking for Flash and Ajax
    SWFAddress is a small but powerful library that provides deep linking for Flash and Ajax. It's a developer tool, allowing creation of unique virtual URLs that can point to a website section or an application state.
    - , 13 Oct 10, 9:42pm -
  • ARToolKit Home Page
    ARToolKit is a software library for building Augmented Reality (AR) applications. These are applications that involve the overlay of virtual imagery on the real world. For example, in the image to the right a three-dimensional virtual character appea…
    - , 20 Apr 10, 4:05pm -
  • Welcome | NodeBox 2
    NodeBox is a new software application for creating generative art using procedural graphics and a new way to approach graphic design.
    - , 14 Apr 10, 4:49pm -
  • CPD-STUDIO

    - , 5 Apr 10, 3:29pm -

marc watthieu - code

j-n montagné - interfaces

j-n montagné - tracking